Glow Glass LLC

******AVAILABLE IN 35gr & 98gr SAMPLE PACKS ONLY AT THIS TIME. PLEASE CONTACT IF ORDERING WHOLESALE QUANTITIES******

Compatible with all/any glass COE

Instructions and tutorials available by phone or e-mail

Roll your hot bead in the powder and then gently swirl the powder with a hot rod to blend it when casing the bead. Or make a stringer by blending and mixing the powder well with two hot rods & then pull a stringer as usual. The stringer can be used to add decoration to your bead.
The glow dust needs to be "charged", preferably with daylight. The amount of glow time is determined by how long the glass was charged. Can hold a charge for 8-12 hrs. with proper charging.

Glow-in-the-dark Glow Glass Powders can be used in lampworking, fusing and off hand glassblowing. All seven colors are compatible with ALL soft glass (90 COE - 132 COE), including ASK, Effetre (Moretti), Vetrofond, Lauscha, Bullseye, System 96, Uroboros, Satake, Czech, Kinari and Satake. All seven Glow Glass colors are compatible with hard glass (33 COE), including Origin, Glass Alchemy, Northstar, Momka and other borosilicate glasses.

Glow Glass Powders are Non-Toxic, Non-Flammable, Non-Radioactive, Non-Carcinogenic and Non-Hazardous.

Glow Glass Powders are charged by exposing them to a light source.

Any light for about one minute will give short term glow.

Strong sunlight for about one hour will charge the glass long enough to glow for many hours.

Our products are now being sold for application to plastics, polymer, paints and all other art mediums as well as glass.

For more information please call, write or stop in anytime.....
Joe Imler /
Glow Glass LLC
PO Box 840248
St. Augustine Beach, Fl. 32080
928-458-6595